The SVSi voLANte™ Product Line |
||||
voLANte VTC 103
|
voLANte VMT 105
|
|||
voLANte VRR 104 
|
voLANte Conductor™
|
|||
Click here for more features and benefits of the voLANte digital video LAN.
The voLANte VTC 103 AV transmitter card
The voLANte™ VTC 103 AV transmitter card accepts DVI or HDMI signals and packetizes for distribution over a LAN. Just install in any host PCI or PCIe slot, plug in the DVI-D cable from a graphics adapter, connect an audio source, and high-resolution synchronized video and audio are streaming over your network. Compatible with any network appliance, the transmitter card streams video and audio at gigabit Ethernet speeds to one or more monitors at distances up to 300-ft (or further with network extenders). See and hear your movie files and presentations on every remote display.
MSRP: US$1,255.00
Specifications
- Can be installed in either PCI or PCI-e slot (slot used for physical support only)
- Full-height, half-length card form factor
- Gigabit Ethernet connection to the voLANte network
- Stereo 3.5mm line-in audio connector
- DVI-D digital video input connector
- Supported resolutions HDTV 720p60Hz and 1080i30Hz and CG 1280x720@60Hz
- Audio & video synchronized or independent
- USB connector for system diagnostics
- Internal disk-drive power connector
- Includes: one3.5-mm audio cable and one 18" USB cable
- 5VDC at <1W
- 7" x 4.5" x 0.75"
The voLANte VRR 104 digital AV receiver
The voLANte™ VRR 104 digital AV receiver plugs into an audio-video LAN and converts Ethernet packets back to synchronized movie files. Compatible with any network appliance on the LAN side or any monitor or TV on the digital video side, the remote receiver requires no software - only power from the included AC power adapter.
MSRP: US$975.00
Specifications
- Gigabit Ethernet connection to the voLANte network
- Stereo 3.5mm line-in audio output connector
- DVI-D digital video output connector
- Supported resolutions HDTV 720p60Hz and CG 1280x720@60HZ
- Audio & video synchronized
- USB connector for system diagnostics
- Includes 5VDC power adapter
- 5VDC at <1W
- 6.5" x 5.5" x 1.1"
The voLANte VMT 105 stand-alone digital AV transmitter
The voLANte™ VMT 105 stand-alone digital AV transmitter is a DVI-D to Ethernet converter that also acts as a gigabit Ethernet switch. No software is needed. Simply connect a DVI or HDMI source into the MRAV unit and connect cat-5 cable to one or more voLANte Remote Receivers to begin playing movie files at multiple locations. A 5VDC power adapter and 3.5mm audio cable is supplied.
MSRP: US$1,395.00
Specifications
- Gigabit Ethernet connection to the voLANte network
- Stereo 3.5mm line-in audio output connector
- DVI-D digital video output connector
- Supported resolutions HDTV 720p 60Hz and CG 1280 x 720 @ 60Hz
- Audio & video synchronized
- USB connector for system diagnostics
- Includes 5VDC power adapter
- Includes 6 ft 3.5 mm-to-RCA adapter cable for audio
- 5VDC at <1W
- 6.5" x 5.5" x 1.1"
voLANte Conductor
When installed on the host computer, the voLANte Conductor content distribution and display management software allows you to:
- send multiple streams down one CAT 5 cable
- assign receivers to various transmitters through an easy-to-use graphical interface
- assign names to each transmitter or receiver on the video LAN
- immediately suspend video and/or audio on any or all displays
- immediately display emergency or otherwise timely information on all displays via EMCast™vicinity alert
Click here to learn more about the flexible playback options you have when scheduling content with voLANte Conductor.
Conductor is packaged with the transmitters.
